Difference between revisions of "Platform compatibility"

From GNUstepWiki
Jump to navigation Jump to search
Line 128: Line 128:
 
tjyang@debian:~/unslung$ rm toolchain/crosstool/.built
 
tjyang@debian:~/unslung$ rm toolchain/crosstool/.built
 
tjyang@debian:~/unslung$make toolchain
 
tjyang@debian:~/unslung$make toolchain
 +
</pre>
  
 +
* A arm gcc with objective-C enabled.
 +
<pre>
 
/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/bin/armv5b-softfloat-linux-gcc -v
 
/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/bin/armv5b-softfloat-linux-gcc -v
  

Revision as of 23:18, 17 February 2005

Note: Anyone know how to convert Platform Compatibility HowTOsource into wiki language, so we can work on others' effort?

Following are procedures for installing GNUstep on different Operating Systems.


AIX

BSD

Darwin

Intel
PowerPC

FreeBSD

You can install GNUstep via /usr/ports/devel/gnustep. However, not all required dependancies are installed.

If you install the following in advance, you should be fine:

  • wmaker
  • libxml2
  • libxslt
  • libgmp4
  • libart_lgpl2
  • libaudiofile
  • ffcall
  • glitz

You may also want to install /usr/ports/net/mDNSResponder.

Note: There is a bug in libkvm that requires a mounted /proc. Until this bug is fixed, make sure you have an entry for /proc in your /etc/fstab:

 proc                    /proc           procfs  rw              0       0

References: FreeBSD GNUstep ports, Freshports GNUstep

Mac OS X

NetBSD

OpenBSD

HP/UX

We should stay away from HPUX-10.20, it is not supported by HP anymore.

Irix

Linux

Debian

Since Debian "Sarge" you can just say

apt-get install x-window-system-core wmaker gnustep gnustep-devel gnustep-games

to get GNUstep, X11 and Window Maker installed.

But what happen if you are on Debian stable (3.0) release ?

Here is an answer from gnustep irc channel:

 <fsmunoz> change every occurence of "stable" for "testing"
 <fsmunoz> remove the security.debian.org line
 <fsmunoz> do apt-get update
 <fsmunoz> apt-get dist-upgrade
 <fsmunoz> repeat  this last one until nothing gets installed or removed.
 <fsmunoz> the, replace "testing" with "unstable"
 <fsmunoz> then, apt-get update
 <fsmunoz> apt-get dist-upgrade
 <fsmunoz> repeat, repeat.
 <fsmunoz> done

The above was a general guide to upgrade from Debian stable to unstable, not exactly the best way to install GNUstep packages. If one doesn't want to upgrade it is possible to simply add the unstable apt lines to the sources.list and specify the distribution when installing the packages, e.g.

# apt-get install -t unstable gnumail.app

This will probably upgrade some other packages to satisfy dependencies, but will have a much small impact on the system since only the packages on which GNUstep depends will be upgraded.

Yet another way is to add tarzeau's repository; he packages a huge ammount of GNUstep packages. Just add this to your sources.list:

deb http://www.linuks.mine.nu/i_debian/ ./   
deb-src http://www.linuks.mine.nu/i_debian/ ./

This repository contains packages made in unstable, so it's possible that the dependencies only are satisfied in unstable systems.

RedHat

Advance Server 3.0
FC 3

Slackware

SuSE

Solaris

http://www.linuks.mine.nu/gnustep/solaris is one package sources to create solaris packages for GNUstep.

Intel

Sparc

Windows

Cygwin

MingW

SFU

Microsfot's Service For Unix.

Others

LiveCD for Intel

Current version is 0.9.4.2

Find the instructions to install and the CD itself here

Linksys NSLU2

  • check out unslung source using follow command.

cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/nslu co unslung

  • add in objc as language need to be enabled.

perl -pi -e 's!^GCC_LANGUAGES=.*!GCC_LANGUAGES="c,c++,objc"!' toolchain/crosstool/nslu2-cross335.sh

perl -pi -e 's!^GCC_LANGUAGES=.*!GCC_LANGUAGES="c,c++,objc"!' sources/crosstool-native/nslu2-native335.sh


  • First thing need to happen is to gnerate a gcc cross compiler with objc enabled.
Current nslu2 supported gcc only has c and c++ enabled when building the crosstool-native package.
    • Compiler cross-compiler for arm cpu using gcc compiler on linux machine.
tjyang@debian:~/unslung$ pwd
/home/tjyang/unslung
tjyang@debian:~/unslung$ rm toolchain/crosstool/.configured
tjyang@debian:~/unslung$ rm toolchain/crosstool/.built
tjyang@debian:~/unslung$make toolchain
  • A arm gcc with objective-C enabled.
/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/bin/armv5b-softfloat-linux-gcc -v

Reading specs from /export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/lib/gcc-lib/armv5b-softfloat-linux/3.3.5/specs
Configured with: /export/home/tjyang/slug/unslung/toolchain/crosstool/build/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/gcc-3.3.5/configure --target=armv5b-softfloat-linux --host=i686-host_pc-linux-gnu --prefix=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5 --with-float=soft --with-cpu=xscale --enable-cxx-flags=-mcpu=xscale --with-headers=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux/include --with-local-prefix=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-__cxa_atexit --enable-languages=c,c++,objc --enable-shared --enable-c99 --enable-long-long
Thread model: posix
gcc version 3.3.5
[tjyang@dual unslung]$
   
    • A simple test of objc on host linux machine.
[tjyang@dual bin]$ pwd
/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux/bin
[tjyang@dual bin]$
[tjyang@dual bin]$ cat helloworld.m
#include <stdio.h>

int main(void)
{
   printf("Hello World\n");
}
[tjyang@dual bin]$ ./gcc helloworld.m -lobjc -o helloworld
[tjyang@dual bin]$ file helloworld
hellow: ELF 32-bit MSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.3, dynamically linked (uses shared libs), not stripped
[tjyang@dual bin]$ uname -a
Linux dual 2.4.21-9.ELsmp #1 SMP Thu Jan 8 17:08:56 EST 2004 i686 i686 i386 GNU/Linux
[tjyang@dual bin]$

    • Second step is to use this cross-compiler which generate binaries code for armb cpu to compile a native compiler. This complier can only be run on native machine nslu2 not on Intel linux.
[tjyang@dual unslung]$ make crosstool-native;make crosstool-native-ipk
[tjyang@dual unslung]$ ls -lrt builds/*.ipk
-rw-rw-r--    1 tjyang   tjyang    5569523 Feb 17 13:32 builds/crosstool-native-bin_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang   12677163 Feb 17 13:33 builds/crosstool-native-lib_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang    1722660 Feb 17 13:33 builds/crosstool-native-inc_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang    7049858 Feb 17 13:34 builds/crosstool-native-arch-bin_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang    9032668 Feb 17 13:34 builds/crosstool-native-arch-lib_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang    7483945 Feb 17 13:35 builds/crosstool-native-arch-inc_0.28-rc37-3_armeb.ipk
-rw-rw-r--    1 tjyang   tjyang       1058 Feb 17 13:35 builds/crosstool-native_0.28-rc37-3_armeb.ipk

[tjyang@dual unslung]$ cp  /export/home/tjyang/slug/unslung/builds/*.ipk  /disk76/nslu2/tmp/
[tjyang@dual unslung]$

login into your nslu2, cd to where the ipk packages are.
run following commands.
bash-2.05b# for i in *.ipk; do ipkg -force-overwrite  install $i; done
Installing crosstool-native-arch-bin (0.28-rc37-3) to root...
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/bin/g++ to './opt/armeb/armv5b-softfloat-linux/bin/c++': No such file or directory
Configuring crosstool-native-arch-bin
Installing crosstool-native-arch-inc (0.28-rc37-3) to root...
Configuring crosstool-native-arch-inc
Installing crosstool-native-arch-lib (0.28-rc37-3) to root...
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/lib/libgcc_s.so.1.dir/libgcc_s.so.1 to './opt/armeb/armv5b-softfloat-linux/lib/libgcc_s.so.1': No such file or directory
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/lib/libstdc++.so.5.0.7.dir/libstdc++.so.5.0.7 to './opt/armeb/armv5b-softfloat-linux/lib/libstdc++.so.5.0.7': No such file or directory
Configuring crosstool-native-arch-lib
Installing crosstool-native-bin (0.28-rc37-3) to root...
Configuring crosstool-native-bin
Installing crosstool-native-inc (0.28-rc37-3) to root...
Configuring crosstool-native-inc
Installing crosstool-native-lib (0.28-rc37-3) to root...
Configuring crosstool-native-lib
Installing crosstool-native (0.28-rc37-3) to root...
Configuring crosstool-native

bash-2.05b# for i in *.ipk; do ipkg -force-overwrite  install $i; done
Installing crosstool-native-arch-bin (0.28-rc37-3) to root...
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/bin/g++ to './opt/armeb/armv5b-softfloat-linux/bin/c++': No such file or directory
Configuring crosstool-native-arch-bin
Installing crosstool-native-arch-inc (0.28-rc37-3) to root...
Configuring crosstool-native-arch-inc
Installing crosstool-native-arch-lib (0.28-rc37-3) to root...
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/lib/libgcc_s.so.1.dir/libgcc_s.so.1 to './opt/armeb/armv5b-softfloat-linux/lib/libgcc_s.so.1': No such file or directory
ipkg: Cannot link from ./opt/armeb/armv5b-softfloat-linux/lib/libstdc++.so.5.0.7.dir/libstdc++.so.5.0.7 to './opt/armeb/armv5b-softfloat-linux/lib/libstdc++.so.5.0.7': No such file or directory
Configuring crosstool-native-arch-lib
Installing crosstool-native-bin (0.28-rc37-3) to root...
Configuring crosstool-native-bin
Installing crosstool-native-inc (0.28-rc37-3) to root...
Configuring crosstool-native-inc
Installing crosstool-native-lib (0.28-rc37-3) to root...
Configuring crosstool-native-lib
Installing crosstool-native (0.28-rc37-3) to root...
Configuring crosstool-native
bash-2.05b#

    • try to compile helloworld.m objective-C file and run the helloworld binary on nslu2.

bash-2.05b# gcc helloworld.m -lobjc -o helloworld
bash-2.05b# file helloworld
helloworld: ELF 32-bit MSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.3, dynamically linked (uses shared libs), not stripped
bash-2.05b# ./helloworld
./helloworld: error while loading shared libraries: libobjc.so.1: cannot open shared object file: No such file or directory
bash-2.05b#

libobjc.so.1 is in /opt/armeb/armv5b-softfloat-linux/lib, this path need to be in LD_LIBRARY_PATH.


bash-2.05b# ./helloworld
Hello World
bash-2.05b# uname -a
Linux LKG7BFA96 2.4.22-xfs #1 Sat Jan 1 21:34:54 HST 2005 armv5b unknown unknown GNU/Linux
bash-2.05b# date
Thu Feb 17 11:35:19 CST 2005
bash-2.05b# cat compile.sh
/opt/armeb/armv5b-softfloat-linux/bin/gcc  helloworld.m -o helloworld -lobjc
bash-2.05b# cat /etc/profile
PATH=/opt/bin:/share/hdd/data/public/nslu2/tjyang/unslung/staging/bin:${PATH}
TERM=xterm
export LD_LIBRARY_PATH=/opt/lib:/lib:/opt/armeb/armv5b-softfloat-linux/lib
export PATH TERM
bash-2.05b#

    • Of course more strong testing is needed. please add instructon below if you know how to run objective-c's testsuite in crosstool.
  • Using Objective-C enalbed gcc to compile gnustep-core,gnustep-* software.

References: http://lists.gnu.org/archive/html/discuss-gnustep/2005-02/msg00124.html